DS18 4" Marine Tower Speakers,Amplifier & Bluetooth Remote

DS18 4“ Marine Tower Speakers 600 Watts /w Amplifier & Bluetooth Remote MP4TP-4A The experts at DS18 have combined some of the best products for testing your favorite sounds against the elements this summer. This is a practical system with three of our best marine grade audio products that are easy to install and enjoy: (4) MP4TP/BK speakers, (1) BTRC-R BT Receiver, (1) MP.4A (4 Channels Amplifier). These products come ready to resist all the elements, water, dust, and vibrations that the world of motorsports brings. DS18's MP4TP 4-inch tower pods display our effort to upgrade the durability of roughly used tower speakers. These new pods have a completely redesigned clamping system made for rough use. They can also be mounted easily on any vehicle but shine best on smaller vehicles that see a lot of vibration. The remodeled clamping system ensure longevity and the utmost stability against all elements. These are the go to speakers for crystal clear audio quality in vehicles with limited space. DS18's BTRC-R is an easy to use BT remote control that adds BT connectivity to any audio system. This BT remote mounts easily in every application and takes up almost no space. This unit will send out signal to your amplifiers and also give you control over the music being played via BT without having to fumble around with your phone, so you have less distractions. Finally, DS18 presents the best digital class amplifier that will provide the best performance out of your speaker towers. The DS18 MP.4A is our latest 4 Channel 600W Marine Amplifier designed to power and lead every product included with the package. With this amplifier, your speakers will deliver audio as clear as the water you're playing it on. Highlights - Designed for marine and powersports applications. - IPX5 water resistance rating. - For All Elements. - BT 5.0 A2DP connectivity. - Wireless connection range up to 130ft. (conditions may vary) - USB Input to play your favorite music files. - 3.5mm jack auxiliary audio input. - High Efficiency 4 Channel Digital Amplifier. - 4 x 4“ Tower Speaker pods with Tube Clamp. - Easy to use - LED illuminated push buttons. - Round cage design for easy installation. - Seamless Flush Mount. - Great for, Car Audio, Motor Cycles, Marine / Boats, Off Road Vehicles, DIY Projects! This listing includes: (4) DS18 4“ Tower Speakers MP4TP-BK (1) DS18 4 Channel Amplifier MP-4A (1) DS18 Bluetooth Remote Controller BTRC-R Hardware Included: (4) Mounting clamps (Pre-Installed on speakers) (16) M6 x 15mm bolts (Pre-Installed) (24) Rubber clamp adapters (1/8“ thickness) (8) 16-22 AWG butt connector (1) RCA to 3.5mm jack Audio Cable 6.5ft (1) 3.5mm Stereo Aux cord (1) Remote Wire 6.5ft (1) Bag with Screws SPECIFICATIONS PER SPEAKER: Speaker Type: Tower Speakers Speaker Size: 4 Inch Total Max Power Handling: 150 Watts RMS Power Handling: 50 Watts Total Impedance 4 Ohm Frequency Response: 60Hz ~ 20KHz Voltage Operation: 9 ~ 15V DC Marine Grade Type: IPX5 + UV Stable Clamps: Tube Type Fixed with Pads for 1-1/2“ to 2“ Finish: Matte Black Sensitivity: 89 dB TOWER WOOFER SPECIFICATIONS: Voice Coil Diameter: 1“ (25.4mm) Voice Coil Former Material: KSV Cone Material: Injection Molded Polypropylene + UV Compliant Surround Material: Butyl (Rubber) Basket Material: Steel with Black protective coating Magnet Material: Ferrite Magnet Weight: 11 Oz Magnet Diameter: 3.14“ (80mm) TOWER TWEETER SPECIFICATIONS: Voice Coil Diameter: 1" (25mm) Voice Coil Former Material: ASV Winding Material: CCAW Type: Dome Diaphragm Material: PEI Magnet Material: Neodymium Magnet Weight: 1.58 Oz Crossover: 6dB/Oct TOWER SPEAKER DIMENSIONS: Overall Diameter: 5.51“ (140mm) Overall Depth: 8.07“ (205mm) Overall Height: 7.28“ (185mm) *With Clamp* ------------------------------------------------------------------ AMPLIFIER SPECIFICATIONS: Amplifier Class: Stereo Full Range Amplifier Type: Digital Number of Channels: 4 Channel Total RMS Power Handling @ 4 Ohms: 4 x 40 Watts Total MAX Power Handling @ 4 Ohms: 4 x 120 Watts Minimum Impedance: 4 Ohm Signal to Noise Ratio: 82dB Power Input Terminal Size: 16 Ga Fuse Size: 20 Amp Thermal Protection: Yes (Greater Than 75°C / 167°F +/- 5°) Over-Load Protection: Yes DC Output Protection: Yes Short Circuit Output Protection: Yes Voltage Input Protection: Yes (Less Than 9.2V / Greater Than 16V) AMPLIFIER DIMENSIONS: Overall Length: 6“ (153mm) Overall Width: 3.66“ (93mm) Overall Height: 1.96“ (50mm) Heatsink Length: 4.72“ (120mm) Single Unit Weight: 1.62 Lbs ------------------------------------------------------------------ BT RECEIVER SPECIFICATIONS: Frequency Response: 20Hz ~ 20KHz Signal to Noise Ratio: Greater Than 80dB T.H.D: Less Than 0.1% Channel Separation: Greater Than 60dB Voltage Operation: 12 ~ 14.4V DC Fuse Size: 5 Amp Bluetooth Version: 5.0 Wireless Range: Greater Than 130 FT (conditions may vary) Waterproof Rating: IPX6 USB Charging Capacity: 1 Amp USB Files Format Compatible: MP3 / WMA RCA Line Out (Pre-Amp): 1 Pair Left & Right 2.5V Aux Line Input: 3.5mm Jack Remote Out: 200mA USB Player: 32Gb with 4FT Extension Cord Buttons: Power-Play-Pause/Source/Next-Volume(+)/Previous-Volume(-)/Bluetooth Pairing Blue Backlit Buttons BT RECEIVER DIMENSIONS: Overall Diameter: 3.7“ (96mm) Overall Depth: 2.44“ (62mm) Mounting Depth: 1.85“ (47mm) Mounting Hole Size: 2.87“ (73mm)